|
Nomination
News
App.
Areas
Contact-us
Contents
Old
Home
Testimonials & Feedback
New:
Long range shooting
|
|
Welcome to the
Information for Moly Fusion and Moly-Fusioned metals/ materials for Scientific
Use, Study, and Real World Applications.-
STATEMENTS FROM THE WEB ASSURANCE
BUREAU, AN INTERNET COMPANY.
Compliment from:
-
Name: Public Relations and Member
Services
-
Date Submitted: February 14, 1998
-
Outstanding Customer Service
-
Congratulations on your outstanding
performance as a member of the Web Assurance Bureau.
-
We salute you in your ability to maintain an absolutely clear unresolved
complaint file.
Compliment from:
-
Name: Tim Evans
-
Date Submitted: May 27, 1998
-
Timeliness
-
I wish to compliment
Solutionshooters (Jonathan Doege) for their assistance and
delivery of their product. The product was urgently required
and they were able to get it out to Australia within a
working week from the date of the order. If all OS companies
were as prompt and helpful as Solutionshooters were,
Australia would feel alot less isolated than it does at
present.
-
Regards Tim Evans
Compliment from:
-
Name: Doc Lisenby
-
Date Submitted: October 28, 1998
-
Product
-
I have tried two products
distributed by Shootersolutions; Sweet Shooter and Moly
Fusion.
-
Sweet Shooter is nothing short of
miraculous when it comes to preventing rust on several of my
firearms.
-
The only way I could prevent rust
in my hot humid climate, prior to using Sweetshooter was to
either clean every spot
-
I touched quickly or keep metal
surfaces oiled while shooting. One treatment seems to last
for weeks (may be longer,
-
but I'm apprehensive about
trying it). I apply it everytime I shoot ... and don't get
any messy build-up.
-
In combination with the
other product, ...
-
-
I have been shooting
in rifle competition for about fifty years and
Sweetshooter with Moly-Fusion have been the least expensive single
items which have improved accuracy ...
-
Sirs, I just fired a pistol which I'd
treated with your fine product. I believe I am very
impressed. It was a short shooting session, intended to work
some basic skills with my daughters, but I was able to put a
couple of magazines through my treated AMT Hardballer. The
recoil seemed lighter, the cycle time seemed quicker
(subjective), and the pistol appeared almost instantly back
on target after each shot. I need to put more rounds through
the gun, but as I said earlier, I believe I am impressed.
Thank you for a fine product. Peter MSgt --- USMC
6/24/99
Jonathan, you are welcome to quote
me, using my initials; that will be fine. In answer to your
question, the velocity was higher from the first shot on. We
did Molyfuse the trigger components, which really smoothed
the Kimbers out; now, they're as smooth as my S70 gold cup,
which I haven't Molyfused yet; it's the control. After
Molyfusing the Kimbers, they do not feel the same as they
did before; now they feel really smooth, action-wise. The
only place we did not Molyfuse was the chamber, as per the
instructions. The weapons work so much better now, we are
going to have to get stronger recoil springs. -- T F
Jonathan Doege, I am very happy with
the molyfusion and sweetshooter. I wanted to let you know
that and share some preliminary test results with you. The
test involved 4 .45 ACPs, 1 colt and 3 Kimbers. The ammo was
from the same batch of handloads. untreated weapon yielded
about 825 fps; 2 weapons MolyFused (2 times) and
sweetshootered once averaged 50 fps higher; 1 weapon
MolyFused 3 times and sweetshootered 3 times averaged 100
fps higher than the untreated weapon. I say the tests are
preliminary because the tests were cut short because the
chrony died after being hit with a 230 gr. The sights have
been repaired, and the chrony has been replaced. I will do
more testing in the near future, and will inform you of the
results. Something we found out is this: clean the barrel
with powder solvent, then copper solvent, then denatured
alcohol, THEN use the MEK, this helps prep the barrel to
"wet" better with the molyfusion. Also, using a
hair dryer to warm up the inside of the barrel before
molyfusing helps too. Thanks again for a remarkable product.
-- T F Stone Creek, OH Dear Jonathan;
-
I tried Moly Fusion twice after our
phone conversation on or about the 25th of June. I did what
you told me to do and applied two applications of the Moly
Fusion to my pistol barrel. I applied the first coat and
something told me I may have done it wrong.
-
I waited a good hour or more and
then applied the second application. This time I knew went
on right (just a feeling) it looked as if the barrel took on
a deferent color.
-
Off to the range I went to test out
Moly-Fusion on Sunday 06/28/98. Accuracy seemed to have
improved but not that much. I had the feeling that only one
treatment of the Moly Fusion had been applied properly.
Clean up was somewhat easier but not what you said it would
be. I decided then that another application of Moly Fusion
was in order. This is how I did it. I ran several clean dry
patches throw the barrel with a cleaning rod and jag to heat
it up, as you said heat helps the metal ( heat was used on
the other two applications as well ).
-
I then sprayed one shot of the Moly
Fusion into the chamber of the barrel. I used a cleaning rod
with a 22 cal. slotted tip and a 22 caliber cleaning patch
to paint the inside of the barrel with the Moly
Fusion this worked great. Doing it this way, I had
control to coat the entire barrel.
-
Off to the range again on July 05,
1998 to see how Moly Fusion works this time. I know I have
treated correctly now. Accuracy has improved
greatly. Clean up was half the time I usually spend
on the barrel. I'll have to get going and treat the rest of
the sweetshooter to see how it will do.
-
My over all opinion of Moly Fusion
- THE STUFF IS GREAT
-
Roger
p.s. I treated the feed ramp of the pistol
with Moly Fusion as well. By the way, all this work was done on a 45cal.
model 1911 Kimber.
From: 9/28/98 8:25 PM
-
Subject: Sweetshooter To:
Shootersolution@mediaone.net
-
Dear Jonathan,
-
Sorry for taking so long in getting
back to you. I took your advice and followed up the [above]
treatment of my guns with Sweetshooter after using the
Moly-Fusion on them. All I can say is WOW !!!!
-
I can't believe the ease in
cleaning the firearms. I use two patches dipped in the
Sweetshooter down the barrel.
-
The first patch that I use is a wet
one.
-
I next use a dry patch followed by
another soaked in the Sweetshooter.
-
This one I run through twice and
leave the inside of barrel wet to let the Sweetshooter soak
in.
-
I then use both of these patches
with the Sweetshooter on them to wipe powder residue off the
rest of the gun.
- I did just as you
suggested, Moly Fusion first, and then the
Sweetshooter.
-
I told you before how I treated the
barrels with the Moly Fusion.
-
On the Sweetshooter, I followed the
directions on the can, and flyer exactly.
-
What a job! Accuracy is up
noticeably with the use of both products.
-
It only takes me one-third
the time to clean up after a trip to the range.
- The only fouling in my
barrel is powder, there is no copper fouling at all.
- I don' t even use a bronze
brush any more!!
-
Thanks,
-
Roger S.
-
Subject: Re: S&W Sigma ???
-
From: david.wells1@usa.net
-
Date: 1998/01/22
-
I had the local S&W authorized
gunsmith take-off a few pounds from the trigger pull of my
SWV9. Giving the trigger mechanism a Sweetshooter
Treatment has smoothed out the pull considerably. I find it
every bit as good as the Glock which I like too.
From: Art London, Professional Gunsmith
, Sent: Sunday, February
07, 1999 9:39 PM; To: 'Jonathan Doege'
-
Good evening Jonathan,
- Have enjoyed using
Molyfusion and find that it works as advertised! I
Bought a small portable hairdryer and that solved the
heating problem. My real joy is Sweetshooter. Use it
daily, particularly when I'm shooting.While I'm
writing, you’d better send me another pint of
Sweetshooter.Charge to VISA. Wouldn't want to run out. [He
got his extra Sweetshooter.]
-
Art London London's Snellville, GA
-
Subject: Cold Blue
-
Pete my man, I hope you aren't
expecting a rust blue finish. Too many people do and are
sorely disappointed with the results. All cold blues are to
my knowledge are selenious acid, copper sulphate, and
phosphoric acid regardless of the manufacturer. 'smiths and
hobbyists have their favorites for some prejudice or
another. Mine is Van's, available from Shooters
Solutions at Shootersolution@mediaone.net This is
their e-mail. Call Jonathan Doege at 1-800 232 3258 and
order a quart for less than half the price of others. I
first saw Van's in my brother-in-law's gunshop before WWII
and they resumed making it recently, same formulation and
just as good as before, I believe.
-
Doc Lisenby
>Jonathan Doege Shootersolutions. 1-800-232-3258
At 07:28 PM 3/23/97 +0000, you wrote:
-
Jonathan, I've had an opportunity
to evaluate "Sweetshooter" and
"Moly-Bond" and here are my observations. I had a
new Colt Cadet .22LR semi automatic on which the
slide never did lock back as it should. After
careful inspection it appeared to be a result of excessive
friction between the slide and frame. After disassembling
the pistol I cleaned all contact surfaces with MEK.
I then applied "Moly-Bond following the simple
instructions. Before assembly I decided to apply a treatment
of "Sweetshooter". This was accomplished
according to the included instructions. Then the pistol was
reassembled and taken to the range. My intention was to
evaluate any improvement in slide function during the
chronograph testing and "Sweetshooter" bore
treatment. While firing prior to, during, and after,
the bore treatment the slide locked
back every time it was supposed to. Using the
chronograph made it possible to determine if
"Sweetshooter" made any distinguishable
differences in the bore. The sequence was to clean the
pistol and fire the first chronograph test, clean and treat
the bore with "Sweetshooter", shoot the final
chronograph test, then clean the pistol again. The
ammunition used was Federal .22LR #750. The
final results are that the initial slide treatment
worked and the slide lock problem is
history. The bore treatment
resulted in a 11 fps increase in velocity, a 13fps reduction
in extreme spread, and 3.5 reduction in standard deviation,
all very desirable improvements. During final cleaning the
bore exhibited noticeably less fouling and was very easy to
clean. At first I was concerned about the price of
these items compared to the volume received. This concern
was unfounded as the products are quite concentrated and a
little goes a long ways, a lot
-
further than any other
product I've tried.
They will prove to be a valuable
asset for the performance and protection of anyone's firearms. will recommend
these products to my students and fellow shooters.
-
CHRONOGRAPH RESULTS OF
ABOVE
|
-
SWEETSHOOTER BORE
TREATMENT
|
-
|
-
Before:
|
-
After:
|
-
Average Velocity:
|
-
1144 fps
|
-
1155 fps
|
-
Extreme Spread:
|
-
72 fps
|
-
59 fps
|
-
Standard deviation:
|
-
22.5 fps
|
-
19 fps
|
-
PS, Jonathan, As I get a chance to
try the other items I will let you know, Thanks, Bob.
-
Jonathan, Feel free to quote my
comments whereever you wish. The only fouling I experienced
after treatment, was slight residue from the burnt powder
and primer compound, which was easily cleaned up and the
bore sparkled.
-
Sincerely, Bob.
-
Sincerely,
-
Bob Whitney
-
Handgun Certifications
-
Above communications edited for spelling: 5/09/97 Note: Bob didn’t realize
Moly-Fusion was a treatment for bores also, I think.
could be used on the
bore before Sweetshooter, at least: It worked, according to data. It is a splendid
product in its own right, I think it is quite safe to say, as it can perform
so well. -- Jonathan Doege.
For Latest Long Range Shooting Stuff, check on link in the left
column
General Information, Sales,
and Support: email@molyfusion.comWebmaster:
webmaster@molyfusion.com
-
For more contact information,
click here: contact-us.
|
™